|
|
||
![]() |
Grublogger Limited
Recycling Jaguars of the 1990's - XJS, XJ12 & XJ6 (X300) |
|
|
|
||
|
To identify the problem, note which toner lights (C, M, Y, Bk) and how many of the maintenance lights (in the area on the right-hand side of the status panel) are on, and refer to the table below. Each area listed under "Problem" represents a general circuit area for the service technician to investigate, not necessarily the exact cause of the problem. |
||
| Grublogger uses this old warhorse colour laser as its office printer and has two spare working units, plus one as a spares donor. So if you need spares, which are pretty scarce these days, it's worth contacting us. | ||
Toner Lights ON |
Consumable Lights ON |
Problem |
| C | 0 | I/O Controller Board |
| C | 1 | SIMM, Slot J11 |
| C | 2 | SIMM, Slot J10 |
| M | 2 | Hard Drive |
| M | 3 | I/O Controller ROM |
| Y | 0 | Fuser |
| Y | 1 | Oil Pump in Fuser |
| Y | 2 | Thermal Sensor in Fuser |
| Y | 3 | Paper Feed Unit |
| Bk | 0 | DC Controller |
| Bk | 1 | Power Supply |
| Bk | 2 | Toner Carousel |
| Bk | 3 | Laser/Scanner Circuit |
| M & Bk | 0 | Main Motor |
| M & Bk | 1 | Drum Motor |
| M & Bk | 2 | Laser/Scanner |
| C & Bk | 0 | Controller Fan |
| C & Bk | 1 | Fuser Fan |
| C & Bk | 2 | Main Fan |
|
|